Prepare Students for Real Careers with Immersive VR Simulations
Close the theory-to-practice gap before students reach the job site. VR Hub gives colleges and trades programs access to 26+ hands-on simulations — welding, HVAC, truck driving, lab science, nursing, and more.
Give Students the Practice They Can't Get in a Classroom
Lab time is limited, equipment is expensive, and live simulations carry real risk. VR Hub extends your lab capacity and lets every student repeat procedures until they're ready — safely.
Stretch Lab Time Without Buying More Equipment
A welding bay can serve four students at a time. A VR module can serve four students simultaneously and run all day without consumables, gas, or protective equipment wear. Saskatchewan Polytechnic-style programme delivery — where students need hands-on time with real procedures before moving to live equipment — maps directly to what VR Hub offers.
Students in trades, healthcare, or lab sciences can complete foundational procedural practice in VR before touching live equipment. That means live lab time is spent on advanced work, not introductory walkthroughs.
- No consumables — run welding, HVAC, and lab modules all day at zero material cost
- Students repeat procedures as many times as needed without supervisor overhead
- Reserve live equipment time for advanced and assessment work
Same Lab Budget
adding equipment or materials cost.
Employer-Ready Graduates Leave With Real Procedural Knowledge
Employers consistently report that new graduates know the theory but freeze when they encounter real equipment. VR Hub addresses that gap directly — students who have completed the Welding or HVAC module have already seen the workflow, handled the virtual tools, and made mistakes in a safe environment before the first live shift.
The Truck Driver module, developed with the Regina Work Preparation Centre, was built specifically to give students real pre-trip inspection and highway driving experience before they sit in a Class 1 cab. That curriculum-to-VR connection is what distinguishes this from generic simulation software.
- Students arrive at practicum with procedural familiarity already built
- Instructors can measure readiness before sending students to live labs
- Employer partners receive graduates who have more than classroom exposure
From Day One
the first live shift or practicum.
Drop-In VR Labs, Blended Learning Ready
VR Hub doesn't require curriculum restructuring. Most instructors integrate a module as a 20–40 minute drop-in session — either as a pre-lab primer before students use live equipment, or as a post-theory exercise to reinforce what they just learned in the classroom.
The Facilitator Tool gives instructors real-time visibility into each student's session from a tablet. You can pause a simulation, give verbal coaching, adjust difficulty for advanced students, and monitor a group simultaneously — making VR lab time genuinely instructor-led, not just unsupervised headset time.
- No curriculum redesign required — drop-in addition to existing labs
- Facilitator Tool: instructor oversight of multiple students simultaneously
- Stats Hub: individual student data for progress tracking and assessment
Instructor-Led
in control of every VR session.
Built for Institutions, Not Just Individual Learners
VR Hub's platform features are designed for the reality of post-secondary delivery — group sessions, instructor oversight, student tracking, and multi-cohort scheduling.
Facilitator Tool — Group Delivery
Run multi-student sessions from a single instructor tablet. Pause simulations, monitor progress, adjust difficulty in real time, and guide students through procedures while they're in VR.
Stats Hub — Student Assessment
Per-student performance data: completion, score, time-on-task, and procedural accuracy. Supports instructor assessment and identifies students who need additional coaching before live work.
Full Module Library Access
All 26+ modules across trades, healthcare, safety, transportation, and hospitality — covering a broad range of post-secondary program areas. New modules each quarter at no added cost.
Upcoming Programme Modules
Nursing Experience (Fall 2026), Heavy Equipment Operator (Summer 2026), and Confined Space Training (Fall 2026) are on the roadmap. Subscribers get early access as they launch.
Instructor Onboarding Included
Subscription includes guided setup and instructor training — covering headset operation, the Facilitator Tool, and how to structure VR lab time within existing course schedules.
Custom Module Development
Need a module mapped to a specific Red Seal occupation, regional equipment, or program standard? Melcher Studios builds custom simulations as a subscription add-on.
Modules Mapped to Post-Secondary Programs
These modules directly address program areas at colleges and polytechnics across Canada, the United States, Mexico, and the Caribbean — trades, healthcare, lab sciences, transportation, and hospitality. All included in your subscription.
Welding — SMAW Introduction
Introduction to Shielded Metal Arc Welding — safety gear, technique, and guidelines. Foundational procedural practice before students move to live welding equipment. No gas, no sparks, no material cost.
HVAC Technician
Diagnose and repair a broken air conditioner and dirty furnace using a multimeter, manifold gauge, and more. Supports HVAC apprenticeship and refrigeration programs.
Carpentry
Hands-on measuring, cutting, and building simulation. Foundational carpentry skills practice without consuming materials or occupying physical bench space.
Truck Driver Experience
Pre-trip inspection and Saskatchewan highway driving in a big rig simulator. Developed with the Regina Work Preparation Centre for Class 1 driver readiness programmes.
Lab Technician Experience
Explore diagnostics using microscopes, blood analyzers, and tissue splicers in a virtual lab. Supports medical laboratory technology and diagnostic imaging programs.
Nursing Experience
Launching Fall 2026 — Subscribers get early access. Covers patient interaction, assessment procedures, and clinical care scenarios for nursing programs.
From Colleges and Training Partners
Institutions and workforce training programs using VR Hub to prepare the next generation of skilled workers.
"The expansion into VR-based safety training is a timely and valuable contribution to building practical skills that benefit both learners and employers. We value our partnership with Melcher Studios and fully support their vision to make VR simulations a powerful tool for career readiness and training in our communities."
"Melcher Studios is a thought-leading enterprise that would be ideal to provide these home-grown VR solutions that would fuel training and career exploration into the future!"
Questions Colleges Ask Before Subscribing
Practical answers for department heads, instructors, and curriculum coordinators.
VR Hub modules are drop-in lab additions — no curriculum restructuring required. Most instructors run a 20–40 minute VR session as a pre-lab primer or post-theory exercise. The Facilitator Tool lets instructors control sessions from a tablet, adjust difficulty, and monitor multiple students simultaneously. Stats Hub captures student performance data so instructors can identify who needs additional support before moving to live equipment.
It depends on your session format. Many institutions run VR as a rotation — 4–6 headsets can support a class of 20 in a single 90-minute lab period. For simultaneous full-class use, you'd need one headset per student. Melcher Studios can advise on the right hardware configuration for your lab format and budget.
Yes. VR Hub subscriptions include onboarding support for your instructors — covering headset operation, the Facilitator Tool, and how to integrate sessions into existing lab time. Ongoing support is available via email and phone throughout your subscription.
Yes. Stats Hub records completion status, score, and time-on-task for each student session. Instructors can view performance at both the individual and cohort level — useful for identifying students who may need additional support on a specific procedure before practicum or live lab work.
Yes. Institutional pricing is available for colleges, polytechnics, and training institutes — structured per department or institution-wide. Contact us via the form below or at info@melcher.ca to discuss a pricing structure that fits your budget and headset count.
Yes. Melcher Studios offers custom module development for institutions that need program-specific simulations — a particular lab environment, regionally-relevant equipment, or a module aligned to a specific Red Seal or provincial programme standard. Custom development is available as an add-on to your subscription. Contact us to discuss scope and timeline.
Request a Pilot Demo for Your Institution
We'll walk you through the platform, show you the modules most relevant to your programs, and discuss how VR Hub fits your lab schedule and budget. Fill out the form and we'll get back to you promptly.
Subscribe to VR Hub
Questions about curriculum integration, student tracking, or institutional pricing? Reach us here or at +1 (306) 359-1666.